29 Jan 2018, 7:24 pm
#393
(29 Jan 2018, 7:12 pm)ne14ne1 I like the new clear bold displays, however I do think rather than just 'Newcastle' which isn't very informative, it should flip between 'Newcastle' (for 1 or 2 seconds) then the street/area its terminating at (for 1 or 2 seconds), and keep flicking between the two.
E.g 'Newcastle' ...then 'Eldon Sq', or 'Pilgrim St', or 'Market St', or 'Central Station'.
My point being is there's quite a little hike between Central St and Eldon Sq for example, but the 54 and 21 both just say Newcastle.
I know many have said the infos there on the bus stops, (and I realise I'm being totally selfish here), but I'm lucky enough to use a stop where several different numbered buses head towards Newcastle. I'm often just getting to the bus stop and a stream of several different numbered buses are approaching, all now just saying 'Newcastle'. Luckily enough I've just about remembered where I'll get dropped off if I board the 1, 11, 21, 26, 27, 28, 54, 56, 57 & 58!
(I know, nice problem to have, but you get my drift).
Not quite what you're suggesting, but when things quieten down, a plan is in the works to try automatic changing of destinations again.
This was disabled after the initial trial on Quaylink back some years ago, as the technology wasn't really all there. On the new Next Stop Announcement hardware, the technology is much improved and definitely works (the X9/X10 change destinations by themselves in Peterlee/Dalton Park, and the 81/82/83/84 had this feature tested a week or two ago).
So, on arrival into Gateshead, the destination on the 21 will change to "Eldon Square" by itself, and so on.
The 21, 26/27 and Q1 are all capable of doing this.
