(13 Jul 2015, 7:50 pm)Dan wrote Before you lot moan about the rear destination - nothing could be done with it, as the glass panel at the back of the bus has to be removed to access the destination display itself. There's no way of changing the switch setting from within the bus..!
You can do it just as easily off the controller with it only being a loan bus. Go into the menu, signs, and match sign 2 up to the one you want, i.e. change S2 * (Switch 2 default) to S2 5 (Switch 2 read Sign Number 5) if your 32x17 is usually sign number 5. It resets to default when the next operator puts their data on. You can do it in HELEN itself too, in Console Config, Modify, Signs, drop down box for Switch 2 to match the sign number you want for that bus, but you'll need to remember to change it back once you've transferred the list to the MMC.