Menu
 
North East Buses Local Bus Scene Go North East Blind displays

Blind displays

Blind displays

 
  • 0 Vote(s) - 0 Average
 
04 Oct 2019, 7:14 pm #1

Hi everyone.


So for those who are aware, I'm working on bus drawings based on GNE liveries. Within these, I show the routes on all three blinds (front, rear and side). One problem I'm facing with a few is that the via points displayed on the front blind don't fit on the rear as the rear blinds are shorter.


Example is below – the drawing I'm focusing on is Loop 93.

Destination: Gateshead loop

Via points: VIA Low Fell then Heworth


Front display: [Image: CLGZQOM.png]


Rear display: [Image: hCSltor.png]


Obviously from the references here, the via points don't fit on the rear display. I was under the impression that the via points would be the same on both displays, but what would the solution be here? I had exactly the same problem yesterday trying to produce the display for service 35 to Low Moorsley, for which at one point the blind displays VIA Sunderland & Houghton and therefore also doesn't fit on the rear.


Any solutions? Anyone have any good quality photos of these? Probably asking for too much here...


Thanks Smile

BeachBoy99
04 Oct 2019, 7:14 pm #1

Hi everyone.


So for those who are aware, I'm working on bus drawings based on GNE liveries. Within these, I show the routes on all three blinds (front, rear and side). One problem I'm facing with a few is that the via points displayed on the front blind don't fit on the rear as the rear blinds are shorter.


Example is below – the drawing I'm focusing on is Loop 93.

Destination: Gateshead loop

Via points: VIA Low Fell then Heworth


Front display: [Image: CLGZQOM.png]


Rear display: [Image: hCSltor.png]


Obviously from the references here, the via points don't fit on the rear display. I was under the impression that the via points would be the same on both displays, but what would the solution be here? I had exactly the same problem yesterday trying to produce the display for service 35 to Low Moorsley, for which at one point the blind displays VIA Sunderland & Houghton and therefore also doesn't fit on the rear.


Any solutions? Anyone have any good quality photos of these? Probably asking for too much here...


Thanks Smile

Andreos1



14,155
04 Oct 2019, 9:15 pm #2

(04 Oct 2019, 7:14 pm)BeachBoy99

Hi everyone.


So for those who are aware, I'm working on bus drawings based on GNE liveries. Within these, I show the routes on all three blinds (front, rear and side). One problem I'm facing with a few is that the via points displayed on the front blind don't fit on the rear as the rear blinds are shorter.


Example is below – the drawing I'm focusing on is Loop 93.

Destination: Gateshead loop

Via points: VIA Low Fell then Heworth


Front display: [Image: CLGZQOM.png]


Rear display: [Image: hCSltor.png]


Obviously from the references here, the via points don't fit on the rear display. I was under the impression that the via points would be the same on both displays, but what would the solution be here? I had exactly the same problem yesterday trying to produce the display for service 35 to Low Moorsley, for which at one point the blind displays VIA Sunderland & Houghton and therefore also doesn't fit on the rear.


Any solutions? Anyone have any good quality photos of these? Probably asking for too much here...


Thanks Smile



So I clicked the urls in your post and got the following images. Appreciate I'm not the most tech savvy when it comes to posting urls, but I'd go for a dowel joint and McLeans.

.jpg
Screenshot_20191004_221322_com.android.chrome.jpg
Size: 888.45 KB / Downloads: 27

.jpg
Screenshot_20191004_221309_com.android.chrome.jpg
Size: 997.31 KB / Downloads: 19


'Illegitimis non carborundum'
Andreos1
04 Oct 2019, 9:15 pm #2

(04 Oct 2019, 7:14 pm)BeachBoy99

Hi everyone.


So for those who are aware, I'm working on bus drawings based on GNE liveries. Within these, I show the routes on all three blinds (front, rear and side). One problem I'm facing with a few is that the via points displayed on the front blind don't fit on the rear as the rear blinds are shorter.


Example is below – the drawing I'm focusing on is Loop 93.

Destination: Gateshead loop

Via points: VIA Low Fell then Heworth


Front display: [Image: CLGZQOM.png]


Rear display: [Image: hCSltor.png]


Obviously from the references here, the via points don't fit on the rear display. I was under the impression that the via points would be the same on both displays, but what would the solution be here? I had exactly the same problem yesterday trying to produce the display for service 35 to Low Moorsley, for which at one point the blind displays VIA Sunderland & Houghton and therefore also doesn't fit on the rear.


Any solutions? Anyone have any good quality photos of these? Probably asking for too much here...


Thanks Smile



So I clicked the urls in your post and got the following images. Appreciate I'm not the most tech savvy when it comes to posting urls, but I'd go for a dowel joint and McLeans.

.jpg
Screenshot_20191004_221322_com.android.chrome.jpg
Size: 888.45 KB / Downloads: 27

.jpg
Screenshot_20191004_221309_com.android.chrome.jpg
Size: 997.31 KB / Downloads: 19


'Illegitimis non carborundum'

04 Oct 2019, 10:24 pm #3

(04 Oct 2019, 9:15 pm)Andreos1


So I clicked the urls in your post and got the following images. Appreciate I'm not the most tech savvy when it comes to posting urls, but I'd go for a dowel joint and McLeans.





Wtf? :') They shouldn't be links either. They should be attached photos?

BeachBoy99
04 Oct 2019, 10:24 pm #3

(04 Oct 2019, 9:15 pm)Andreos1


So I clicked the urls in your post and got the following images. Appreciate I'm not the most tech savvy when it comes to posting urls, but I'd go for a dowel joint and McLeans.





Wtf? :') They shouldn't be links either. They should be attached photos?

Andreos1



14,155
04 Oct 2019, 10:43 pm #4

(04 Oct 2019, 10:24 pm)BeachBoy99


Wtf? :') They shouldn't be links either. They should be attached photos?



Dunno if this is what others are seeing.

.jpg
Screenshot_20191004_234207_com.android.chrome.jpg
Size: 523.32 KB / Downloads: 24



'Illegitimis non carborundum'
Andreos1
04 Oct 2019, 10:43 pm #4

(04 Oct 2019, 10:24 pm)BeachBoy99


Wtf? :') They shouldn't be links either. They should be attached photos?



Dunno if this is what others are seeing.

.jpg
Screenshot_20191004_234207_com.android.chrome.jpg
Size: 523.32 KB / Downloads: 24



'Illegitimis non carborundum'

04 Oct 2019, 10:54 pm #5

(04 Oct 2019, 10:43 pm)Andreos1


Dunno if this is what others are seeing.




This is why I hate trying to attach photos into forums. Absolutely shit.


(04 Oct 2019, 10:43 pm)Andreos1


Dunno if this is what others are seeing.




It's probably because you're on mobile also. I'm using desktop.

Edited 04 Oct 2019, 10:55 pm by BeachBoy99.
BeachBoy99
04 Oct 2019, 10:54 pm #5

(04 Oct 2019, 10:43 pm)Andreos1


Dunno if this is what others are seeing.




This is why I hate trying to attach photos into forums. Absolutely shit.


(04 Oct 2019, 10:43 pm)Andreos1


Dunno if this is what others are seeing.




It's probably because you're on mobile also. I'm using desktop.

V514DFT



2,224
04 Oct 2019, 11:17 pm #6
I see the image,not a link

Kind Regards
Tez
V514DFT
04 Oct 2019, 11:17 pm #6

I see the image,not a link


Kind Regards
Tez

05 Oct 2019, 6:33 am #7

(04 Oct 2019, 11:17 pm)V514DFT I see the image,not a link

same

garrymc05
05 Oct 2019, 6:33 am #7

(04 Oct 2019, 11:17 pm)V514DFT I see the image,not a link

same

05 Oct 2019, 1:39 pm #8
So has anyone got any solutions to the problem rather than saying they can see the attached photos? -.-
BeachBoy99
05 Oct 2019, 1:39 pm #8

So has anyone got any solutions to the problem rather than saying they can see the attached photos? -.-

05 Oct 2019, 4:38 pm #9

I know the 35 just says “via Sunderland” on the rear rather than both via points.

deanmachine
05 Oct 2019, 4:38 pm #9

I know the 35 just says “via Sunderland” on the rear rather than both via points.

05 Oct 2019, 10:39 pm #10

(05 Oct 2019, 4:38 pm)deanmachine

I know the 35 just says “via Sunderland” on the rear rather than both via points.



Ah right thanks! Thought it would have Smile" alt="Smile" title="Smile">

BeachBoy99
05 Oct 2019, 10:39 pm #10

(05 Oct 2019, 4:38 pm)deanmachine

I know the 35 just says “via Sunderland” on the rear rather than both via points.



Ah right thanks! Thought it would have Smile" alt="Smile" title="Smile">

 
  • 0 Vote(s) - 0 Average